Crack Sealing
Cracks in pipes often occur due to frost, material fatigue, or mechanical damage. Depending on the length and position of the crack, different GEBO products are used.
- Damp spot on the pipe
- Visible crack formation
- Slow pressure loss
- Frost damage after cold period
- In case of frost damage: Allow pipe to thaw slowly
- Shut off water supply
- Measure crack length precisely
- 1Determine crack length and position
- 2Shut off water supply
- 3Measure pipe diameter
- 4Select sealing clamp with sufficient width
- 5Position clamp so that the crack is completely covered
- 6Tighten evenly